Please follow the steps below to check:
1️⃣ Clear the current errorPress and hold the Mow + OK buttons simultaneously to clear the error.
2️⃣ Check the STOP buttonInspect the STOP button for any debris and make sure it returns to its normal position when pressed.
3️⃣ Reinstall the top cover and restart the deviceReinstall the mower’s top cover, then restart the device and check if the error disappears.
4️⃣ If the error persistsPlease contact support@anthbot.com and provide the following information:
● Device SN
● Video or photos showing the issue
● The exact date and time the issue occurred
Customer support will assist you in resolving the problem as quickly as possible.
Error E700 – What should I do?
Comments
1 comment
I have done the instructions and nothing helps.
The mover stops in the mitthel of nowhere with the fault E700 - it does not help to follow the instructions. The only way of reset is to carry it back to the charging station - resetit and type the pin code. It gets the fault around 1 time per job.
Please sign in to leave a comment.